Page 75 - KNA Supply Commodities Catalog 2024

KNA

18769 11369
Black E-Coat Zinc
(168 Hours Salt Spray)
#14 x 3/4”
M6-1.0 x 20mm Slotted Hex Washer Head License Plate Screw
Phillips Pan Head License Plate Screw Washer Head O.D.: 1/2”
Head Diameter: 12mm (15/32”) Hex: 3/8”
UNIT PACKAGE: 50 Purpose Ford
UNIT PACKAGE: 25 UNIT PACKAGE: 25

8242
(6023925)

Nylon
License Plate Nut WASHER LOCK NUTS
Screw Size: 1/4” (#14) ZINC PLATED
Chrysler
UNIT PACKAGE: 25 ITEM # THREAD SIZE WIDTH HEX O.D. UNIT QTY
2561 1/ 4”-20 7/16” 19/32” 25
12259 5/16”-18 1/ 2” 13/16” 25

THIN SHEET NUTSERT® INSERTS

METRIC - STEEL
Threaded Inserts for Thin Material
The Auveco Thin Sheet Nutsert has been designed to provide a highly efficient method of securing threads from
one side of the work, in materials generally too thin to support threads. Its performance has been proven in
plastic, aluminum, mild steel and fiberglass. They can also withstand high loads without vibrating or loosening
under extreme operating conditions. The Auveco Thin Sheet Nutsert is a tension fastener with high pull out,
insuring no rotation or vibration where a cover plate is used. The system’s unique blind tooling installs TSNs at
consistent rates using unskilled labor.
How it Works
The Thin Sheet Nutsert, held securely by the tool, is placed into a prepared hole. Upon the tool’s actuation, the
threaded portion is pulled until the fastener’s wall collapses radially outward, clinching it tight against the sheet.
The tool is withdrawn, leaving the Thin Sheet Nutsert ready to receive a bolt or screw. This complete operation
takes only a few seconds and can be performed by anyone.

Strength Tests: Torque Strength: with an attaching part over the Thin Sheet Nutsert, offering a bearing surface,
the TSN will remain intact past the point of the screw or bolt breaking (head torqued off). In almost all cases the
threads of the TSN will remain undistorted and serviceable; an exception to this statement is when an extremely
high tensile bolt is used.
Steel: 1010 Low Carbon Steel, Type 11 Class 3 with Zinc Plate, Clear Chromate

THREAD SIZE AFTER RECOMMENDED A B D DRILL
ITEM # HOLE SIZE UNIT QTY
INSTALLATION GRIP RANGE MAX. MAX. REF. SIZE
.030-.165” .374” .610” .415” .375-.379”
12984 M6-1.0 3/8” 25
.762/4.190MM 9.50MM 15.49MM 10.54MM 9.53/9.63MM

KNA SUPPLY • 1607 N. MAGNOLIA AVE, OCALA, FL 34475 • KNASUPPLY.COM • 352-351-1170 13-10